PRETOX 2000 DM DATA SHEET
DESCRIPTION
PreTox 2000 Demo is a single component overcoating applied to a lead-based paint coated surface prior to demolition or renovation operations. PreTox 2000 Demo renders lead-based paint non-hazardous for disposal. Designed with good adhesion, PreTox 2000 Demo is easy to use on the job. PreTox 2000 Demo will remain intact throughout the demolition or removal process and ensure non-hazardous disposal of waste.
RECOMMENDED APPLICATION EQUIPMENT
PreTox 2000 Demo can be applied by brush, roller or mechanical spray equipment. Industrial grade airless spray equipment such as a Graco King or Bulldog is recommended. When using such equipment, use a .045 tip or larger and remove all filters or use 20 mesh or larger filter.
PRODUCT USE
- Mix thoroughly (Power drill and mixing bar are preferred).
- Apply to substrate.
- Allow to dry.
- Remove component or demolish structure.
- Sample waste as per federal and local regulation (for assistance, call NexTec at 800-338-8296).
- Dispose of debris.
SAFETY PRECAUTIONS
PreTox 2000 Demo contains combustible solvents. Ensure that adequate ventilation and personal protective equipment compatible with solvent coatings is used during application and curing.
THINNING/CLEAN UP
Thinning is not required or recommended. Clean up equipment after use with any aliphatic or aromatic solvent.
FEATURES
- Dry time 8 hours at 70ºF and 50% RH
- Spread rate: 2,000 to 5,000 sq.ft/hr depending on substrate and equipment.
- Coverage 25 to 100 sq.ft/gal depending on paint and substrate. Average coverage for typical structures is 40 sq.ft/gal.
- VOC = 3.3 lb./gal
- Flashpoint = 106º F
- Solids = 72% (by weight)
- Weight per gallon = 11.5lbs
RECOMMENDED USES
- Residential Demolition
- Remodeling
- Commercial Demolition
- Component Removal
- Brick/Masonry Wood
- Historic Renovations
COMPATIBLE REMOVAL METHODS
- Component removal
- Knock-down Demolition
To the best of our knowledge the technical data herein are true and accurate at the date of issuance and are subject to change without prior notice. No guarantee of accuracy is given or implied.Manufacturer warrants that the Products are free from defects in material and workmanship under normal use and proper storage. Manufacturer’s obligation under this warranty shall be limited to the replacement of any product that may be defective within one year from the date of shipment to the original purchaser, and which Manufacturer’s examination discloses to Manufacturer’s satisfaction to be defective or at the Manufacturer’s option, to refund Distributor in an amount equal to the purchase price paid by Distributor. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON MANUFACTURER’S PART, AND MANUFACTURER NEITHER ASSUMES, NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR MANUFACTURER, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. THIS WARRANTY SHALL NOT APPLY TO PRODUCTS OR ANY PART THEREOF WHICH HAS BEEN SUBJECT TO FREEZING, EXCESSIVE HEAT, DILUTION, IMPROPER MIXING, IMPROPER STORAGE, OR IMPROPER APPLICATION