< Back to products

PRETOX 2000 FAST DRY DATA SHEET

DESCRIPTION

PreTox 2000FD is a single component, temporary overcoating applied to a lead-based paint coated surface as part of surface preparation/lead abatement operations. PreTox 2000FD renders lead-based paint non-hazardous for disposal. Designed with fast dry times and limited adhesion, PreTox 2000FD is easy to use on the job. PreTox 2000FD does not contribute additional dust during abrasive blasting or cause additional wear and tear on equipment.

RECOMMENDED APPLICATION EQUIPMENT

PreTox 2000FD can be applied by brush, roller or mechanical spray equipment. Industrial grade airless spray equipment such as a Graco King or Bulldog is recommended. When using such equipment, use a .045 tip or larger and remove all filters or use 20 mesh or larger filter.

PRODUCT USE

  • Mix thoroughly (Some settling will occur during storage).
  • Apply to substrate.
  • Allow to dry (usually one hour or less).
  • Remove along with underlying coating.
  • Sample waste as per federal and local regulation (for assistance, call NexTec at 800-338-8296).
  • Dispose of debris.

SAFETY PRECAUTIONS

PreTox 2000FD contains flammable solvents. Ensure that adequate ventilation and personal protective equipment compatible with solvent coatings is used during application and curing.

THINNING/CLEAN UP

Thinning is not required or recommended. Clean up equipment after use with any aliphatic or aromatic solvent.

FEATURES

  • Dry time <1 hour="" at="" 70="" f="" and="" 50="" rh="" li="">
  • Spread rate: 2,000 to 5,000 sq.ft/hr depending on
    • substrate and equipment.
  • Average coverage for steel structures is 80 sq.ft/gal.
  • VOC = 2.7 lb./gal
  • Flashpoint = 71º F
  • Solids = 72% (by weight)
  • Weight per gallon = 11.5lbs

RECOMMENDED USES

  • Structural Steel
  • Ships
  • Storage Tanks
  • Concrete
  • Brick/Masonry
  • Wood
  • Heavy Equipment
  • Pipelines

COMPATIBLE REMOVAL METHODS

  • Dry Abrasives
  • Wet Abrasives
  • Sponge Abrasive
  • Power Tools
  • Recyclable Abrasives
  • Water Jetting

To the best of our knowledge the technical data herein are true and accurate at the date of issuance and are subject to change without prior notice. No guarantee of accuracy is given or implied.Manufacturer warrants that the Products are free from defects in material and workmanship under normal use and proper storage. Manufacturer’s obligation under this warranty shall be limited to the replacement of any product that may be defective within one year from the date of shipment to the original purchaser, and which Manufacturer’s examination discloses to Manufacturer’s satisfaction to be defective or at the Manufacturer’s option, to refund Distributor in an amount equal to the purchase price paid by Distributor. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON MANUFACTURER’S PART, AND MANUFACTURER NEITHER ASSUMES, NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR MANUFACTURER, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. THIS WARRANTY SHALL NOT APPLY TO PRODUCTS OR ANY PART THEREOF WHICH HAS BEEN SUBJECT TO FREEZING, EXCESSIVE HEAT, DILUTION, IMPROPER MIXING, IMPROPER STORAGE, OR IMPROPER APPLICATION